Flowflex Shower Power Booster SP22S


Flowflex Shower Power Booster SP22S
Code: SP22S

The Shower Power Booster is a compact but powerful pump which can be retro-fitted to any shower, tap or hot water system to boost water pressure or flow.


The Shower Power Booster is a compact but powerful pump which can be retro fitted to any shower, tap or hot water system to boost water pressure or flow. Designed as a retro-fit booster, it uses a safe 12-volt brushless motor, which is highly efficient, fully waterproof, with low friction long-life bearings. Due to its size and it’s in line design the pump can be installed where ever is most convenient, it can be installed at any angle or orientation and as it is supplied with a transformer there is no need for an electrician to install the pump.

In The Box:

    2 x Fully Automatic Pumps
    2 x 22mm x 15mm Reducing Sets
    1 x 3 Amp Transformer
    3 Way Cable (to link power)
    4 Way Cable (to link pump)

Applications:

The SP22S is perfect for gravity systems. A pump installed on both the hot & cold feeds will give the system a boost but also keep the pressure balanced meaning you get no issues with hunting or fluctuations in water pressures & temperatures

    For Gravity System (Hot & Cold Gravity Feeds)
    For Mixed System (Gravity Hot & Mains Fed Cold)
    Can be used to boost Combi Boilers & Electric Showers. 

Installation:

    Easy to Install: DIY in 3 Steps
    For a Whole House solution install close to the Hot Water Cylinder (After the vent pipe)
    To improve a single shower install on a specific feed
    Install on vertical or horizontal pipe (If horizontal ensure white motor hangs below the feed)
    Do not adjust the motor nuts. These are factory set tensions

Technical Specifications

    Min Flow Rate: 1.8 Litres/min
    Max Flow Rate: 9 Litres/min
    Typical Output: Double your flow 6-8 Litres/min
    Max Temp / Pressure 85oC at 4 Bar
    WRAS Approved